OEM HVAC Rubber Synthetic Aluminum Foil Tape

• Customization: Available
• Usage: Refrigerator, Air Condition
• Type: Roll
• Treatment: No Treatment
• Thickness: 13 Microns
• Surface State: Single Light Aluminum Foil
• Rolling Characteristics: Finish Rolling
• Material: Dead Soft Aluminum Foil
• Adhesive: Rubber Synthetic
• Transport Package: Carton
• Specification: 58mm x 23m
• Trademark: WENDA
• Origin: China
• HS Code: 76072000
• Production Capacity: 50000 Cartons Per Month

Product Description

Aluminum foil tape 508

 

Construction: 13 micron dead soft aluminum foil, pressure sensitive adhesive (rubber synthetic), 
Thickness: 40+-2 microns (alufoil+adhesive)

Roll size: 58mm(2.5") x23m(75.5 feet)

Packing: 30rolls/carton, 5 rolls/shrink film or individually packed with shrink film

Application: To seal joints and seams against moisture and vapor on foil jacketing or used in refrigerators

For more info, pls contact us directly.
Our tapes are tested for the presence of restricted substances and comply with the RoHS directive or SGS certified non toxic

OEM is also welcome.

DATA SHEET
FOR ALUMINUM FOIL TAPE 508

Facing Composition

Composition	Description
Aluminum foil	13microns
Adhesive	Synthetic rubber 28±2 microns
Liner	White release paper

Physical Properties
 

Properties	Unit	Value	Test Method
Peel adhesion	KN/M	0.5-0.65	PSTC-1
Rolling Tack (11mm ball)	CM	≥20	PSTC-6
Adhesion to liner	KN/M	0.003	PSTC-4
Temp.Resistance	ºC	0~60	-------

REMARKS

1. The data above are typical results and subject to change without notice.
2. The products should be stored at room temperature and kept from wet and kept away heat source.
3. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique