3" 75mm Rubber Adhesive Aluminum Foil Tape W/Liner

• Usage: Refrigerator, Air Condition, Kitchen Use
• Type: Roll
• Temper: Soft
• Treatment: No Treatment
• Thickness: Single Zero Foil
• Surface State: Single Light Aluminum Foil
• Model NO.: 503E
• Rolling Characteristics: Finish Rolling
• Material: Dead Soft Alufoil
• Transport Package: Carton
• Specification: 75mm x 28m
• Trademark: WENDA
• Origin: China
• HS Code: 76072000
• Production Capacity: 500000 Square Meters Per Month

Product Description

Aluminum foil tape 503E
Construction: 15 micron dead soft aluminum foil, pressure sensitive adhesive (rubber synthetic)
Size: 75MM X28M(3"  X 30.6 yards)
Packing: 4 rolls/ shrink film, 24 rolls/carton, blank carton and core , or core and carton with Wenda logo
Delivery time: 
 

Cartons	Lead time  (days)
100	3
300	5
500	7
1200	10

 

Cut rolls, log rolls or jumbo rolls are available based on request.

Buyers can have their own logo printed on cartons and cores after being confirmed by Seller and the delivery time will be  a bit longer than the time above mentioned

Application: To seal joints and seams against moisture and vapor on foil jacketing or used in refrigerators, water heaters and gas stoves.

For more info, pls contact us directly.
Our tapes are tested for the presence of restricted substances and comply with the RoHS directive or SGS certified non toxic
 

DATA SHEET
FOR ALUMINUM TAPE503E

Facing Composition

Composition	Description
Aluminum foil	18 microns
Adhesive	Hot melt adhesive (synthetic rubber adhesive)        32microns
Liner	85- micron white release paper

Physical Properties

Properties	Unit	Value	Test Method
Peel adhesion	KN/M	≥0.56	PSTC-1
Rolling Tack (11mm ball)	CM	≥20	PSTC-6
Adhesion to liner	KN/M	0.003	PSTC-4
Temp.Resistance	ºC	10~60	-------
Total thickness (glue+ aluminum)	50±2 microns

REMARKS

1. The data above are typical results and subject to change without notice.
2. The products should be stored at room temperature and kept from wet and kept away heat source.
3. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique